Yankee Products
Choose a size range & click "View" to see sizes & prices. "Intermediate Prices" lists prices for non-stocked sizes by size range & quantity We have many 433 Intermediates in stock. Note: Reamers made from M-2 (HSS) are hardened to 63.5-64Rc and those made from M-42 (Cobalt) are hardened to 66-67Rc.
Designed for use in all types of machine tool equipment. Ground with a 45 degree chamfer, they are suitable for production reaming of most materials.
- 433 Straight Flute
- 435 RH Spiral
- 435L Left Hand Spiral
Intermediate Chucking Reamers High Speed Steel
Designed for use in all types of machine tool equipment. Ground with a 45 degree chamfer, they are suitable for production reaming of most materials.
Chucking Reamers Cobalt
Designed for use in all types of machine tool equipment. Suited for use in reaming high alloy steels, titanium, inconel, stainless, and other difficult to machine materials
- 1433 Straight Flute
- 1435 RH Spiral
High Speed Steel Straight Shank Production Length Reamers
Similar to High Speed Chucking Reamers (433, 435), but are produced with a shorter shank (making them more economical)
- 333 Straight Flute
- 335 RH Spiral
High Speed Steel Finishing Taper Socket Reamers
Made for finishing both Morse and Brown & Sharpe Tapered sockets
- 451 Straight Shank, Morse Taper Flute
- 457 Morse Taper Shank, Morse Taper Flute
- 496 Straight Shank, Brown & Sharpe Taper Flute
Dowel Pin Reamers
Similar to High Speed Chucking Reamers (433, 435, 435L), but are produced with increased back taper and a minus diameter tolerance (as suggested by Danly Machine in Chicago)
- 470 Straight Flute
- 475 RH Spiral
- 475L LH Spiral
Cobalt Dowel Pin Reamers
Similar to Cobalt Chucking Reamers (1433, 1435), but are produced with increased back taper and a minus diameter tolerance (as suggested by Danly Machine in Chicago)
- 1470 Straight Flute
- 1475 RH Spiral
Taper Shank Chucking Reamers
Similar to High Speed Chucking Reamers (433, 435), but have a Morse Taper Shank
- 436 Straight Flute
- 437 RH Spiral
High Speed Steel Taper Shank Reamers
Similar to High Speed Chucking Reamers (436), but are produced with long flutes for additional depth capacity Jobber Reamers are also utilized as Line Reamers
- 406 Straight Flute
High Speed Steel Straight Flute Expansion Chucking Reamers
Expansion Chucking Reamers are size renewable. After reamer is worn undersize, the end screw can be tightened to enlarge the reamer, which can then be reground to original size for re-use
- 431 Straight Shank
- 432 Morse Taper Shank
High Speed Steel Straight Shank Hand Reamers
These precision ground reamers are slightly tapered on the end to facilitate proper starting and have a standard square on the end of the shank
- 400 Straight Flute
- 403 Left Hand Spiral
Valve Guide Reamers High Speed Steel
Designed to accurately ream guides in Cast Iron and piloted for easy centering.
- 500 Straight Shank LH Spiral
Taper Pipe Reamers
Designed for reaming holes to be tapped with American National Standard Taper Pipe Taps.
- 600 Taper Pipe Reamer
- 604 Taper Pipe Reamer
- 606 Taper Pipe Reamer
Construction Reamers
The reamers are specially designed for heavy duty reaming as encountered in the fabrication of structural steel assemblies. They are similar to the Bridge Reamers above, but feature a straight shank with a stop collar for safety. Available with 3 chucking flats for additional torque (595)
- 495 LH Spiral Round Shank
- 595 LH Spiral Round Shank with 3 Flats
